The CONDOR - SD Secondary Cleaner removes up to 97% of material clinging
to the belt surfaces. They can be used singly or in tandem if necessary and,
should be used in conjunction with a Primary scraper for optimum performance.

X Multiple blade arrangement allows blades to conform to belt profile,
especially when worn.

X The angle of cleaning is always a Scraping angle which will not
damage the Belt

X Robust construction of cleaner assembly resists accidental damage.

X It also helps Blades to deflect to accommodate reversing belts.

X The Blades deflect when encountering metal belt fasteners, belt
repairs or belt damage.

X High quality paint finish on all metal parts ensures optimum corrosion
protection.

• Economical and efficient solution for tail protection
• Choice of rubber and polyurethane blades to suit various temperatures and belt speeds.
• V-Plow for unidirectional and diagonal plows for reversible application.
• Tensioning  arrangement to ensure constant contact between cleaner blade and belts.
• Suitable for high speed and high tonnage belts.
• Can be customized to meet site requirements.

Installed as a secondary cleaner along the conveyor’s return run, the Belt Washing
System provides the ultimate in belt cleaning technology.

Each Belt Washing System can be customengineered to match your cleaning
requirements. This spray wash system will be supplied in a watertight metal enclosure
fitted with water service and a drain. Each Belt Washing System consists of a steel
enclosure equipped with rollers, spray bars,and Secondary Belt Cleaners. THEJO
CONDOR Belt Cleaners are standard part for the equipment.The spray wash system
shall consist of pressure rollers to hold the belt in position. The same will not be part of
standard supply.

The box is be fitted with a water spray bar with nozzles positioned to wet the entire belt
width and flush out the box through the installed drain. The water softens the carry back
and provides lubricity to allow the maintenance of effective cleaning pressure. The wash
system shallbe fitted with multiple secondary cleaners to provide complete removal of
fines and water from the belt surface. The shall allow easy inspection and service through
a watertight access door.

STANDARD BELT WASHING SYSTEM INCLUDES

Multiple Belt Cleaners with TC blades.
A Pressure rollers to hold the belt in position against the cleaners.
Necessary Mounting hardware.
Two SPRAY BARS with Nozzles and Valves.
Center Discharge Enclosure

Primary Scrapper